Licensed & Insured, in Chico and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Chico
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (530) 924-0344 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Chico and surrounding areas · On-site visits included · Free estimate within 24h
Chico Metal Roofing is a team of local certified professionals based in Chico. We respond quickly in Chico and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (530) 924-0344⭐⭐⭐⭐⭐ 4.9/5 · 292 verified Google reviews
“We needed a new metal roof on our barn out past Durham and these guys knocked it out in two days with a four-man crew. The corrugated panels went on straight and they cleaned up every last screw and scrap before leaving. Huge relief heading into winter.”
Commercial Metal Roofing
“They retrofitted the porch roof over the old shingles and it looks like a brand new addition. Took about three days and the crew was super respectful of our landscaping.”
Metal Roof Over Shingles (Retrofit)
“Our orchard shed roof was rusted through in spots and they replaced the whole thing with ribbed panels. Fair price, showed up when they said, and the barn is finally dry. Only wish they'd given me a bit more notice before the delivery truck showed up, but overall really happy.”
Agricultural Metal Roofing
“I was worried about debris piling up and damaging the panels around our place up in Forest Ranch, so I had them come out for an inspection. They walked the whole roof, cleared the buildup, and re-fastened a few loose screws while they were at it. Honest folks, didn't try to sell me a whole new roof.”
Metal Roof Inspection
“Had a leak right around the ventilation pipe on our metal roof and these guys tracked it down fast. They redid the flashing and sealed it up proper. Two weeks of rain since and not a drop inside.”
Flashing & Skylight Repair
“After that windstorm tore up a section of our roof, Chico Metal Roofing came out and got it patched and re-fastened before the next storm hit. They even hauled off the torn panels. Genuinely grateful they squeezed us in so quick.”
Storm & Wind Damage Repair
“We went with standing seam on our house and the finished roof is stunning, clean lines, no exposed screws, exactly what we wanted. The crew of five finished in under a week and the cleanup was flawless. Worth every penny.”
Standing Seam Metal Roofing
“They tore off the old failing roof on our wood-and-stone house and installed new metal panels with fresh flashing around the chimney. The house looks completely transformed. Communication could've been a little better mid-project, but the end result is solid.”
Metal Roof ReplacementReal photos of our work in Chico · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener corrugated or ribbed panel | From $8/sq ft | Includes tear-off, underlayment and screw-down panel; roof pitch and deck condition move the price. |
| Standing seam metal roof | From $12/sq ft | Concealed fasteners and premium underlayment included; panel width and seam count drive the range. |
| Metal shingle or stone-coated steel | From $14/sq ft | Includes profile-matched trim and ember-resistant details; complex hips and valleys raise labor. |
| Complex or large-scale job | On estimate | Steep pitches, multiple skylights, chimneys and historic review need an on-site look first. |
| Travel | Included | In Chico and surrounding Butte County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (530) 924-0344, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam, standard 1-inch snap-lock | Starting at $10/sq ft | Includes 24 or 26 gauge panels, underlayment, and standard flashing; roof pitch and complexity raise the rate |
| Mechanically seamed 1.5-inch panel | Starting at $13/sq ft | Includes powered double-lock seaming and heavy-duty clips; steep ridge pitches and staging add cost |
| Tear-off and deck repair | Quoted per job | Priced separately once we see sheathing condition, common on 1910s bungalows and post-fire rebuilds |
| Complex roof (turrets, valleys, multiple planes) | On estimate | Victorian and Queen Anne roofs need an on-site layout before we can price panel runs and flashing |
| Travel | Included | in Chico and surrounding Butte County communities, with no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (530) 924-0344, with no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel replacement | Starting at $9/sq ft | Includes tear-off, decking inspection, underlayment, and corrugated or ribbed panels; steep pitch adds cost. |
| Standing seam replacement | Starting at $14/sq ft | Concealed fasteners and raised seams; two-story access and complex hips push the rate higher. |
| Stone-coated steel or metal shingle replacement | Starting at $16/sq ft | Textured steel shingles or tiles; historic district and HOA pre-approval can add lead time. |
| Copper or specialty metal replacement | On estimate | Soldered copper and zinc need an on-site look at the roof geometry and flashing details first. |
| Decking repair during replacement | Quoted per sheet | Rot and delaminated sheathing found at tear-off; 1920s skip sheathing often needs full replacement. |
| Estimate | Free | Roof walk and written scope within 24 hours at (530) 924-0344, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over one layer of shingles | Starting at $7/sq ft | Includes slip sheet, standard flashing, and panel install on a sound single-layer deck. |
| Retrofit with minor deck repair | Starting at $8.50/sq ft | Adds replacement of soft deck boards and re-fastening of loose sheathing before panels go down. |
| Standing seam retrofit | Starting at $12/sq ft | Concealed fasteners, purlins, and premium flashing for the longest service life. |
| Complex or steep-pitch roof | On estimate | Steep pitch, multiple valleys, or heavy penetrations need an on-site look before pricing. |
| Travel | Included | In Chico and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (530) 924-0344, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (sealant, screws, small flashing) | Starting at $450 | Covers resealing a penetration, replacing a few screws, or a small flashing fix, with water test included |
| Panel replacement (single panel) | Starting at $850 | Includes matching panel, new fasteners, and sealant; price rises with roof height and panel profile availability |
| Storm or wind damage repair | On estimate | Multiple slopes, lifted panels, or structural damage need an on-site look before we quote a number |
| Tree impact repair | On estimate | Depends on limb size, panel damage, and whether the purlin or underlayment was affected |
| Travel | Included | In Chico and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (530) 924-0344, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single leak trace and repair | Starting at $450 | Includes full leak trace, photo documentation, and repair of one traced fault such as a boot or fastener cluster. |
| Multiple fastener and seam repair | Starting at $750 | Covers a larger repair zone with several failed fasteners or separated seams, priced by roof access and panel count. |
| Flashing or skylight rebuild | Starting at $950 | Rebuilds failed flashing at a chimney, wall, or skylight curb, with price driven by height and detail complexity. |
| Emergency tarping during storm | Starting at $350 | Stops active water intrusion during winter storms, credited toward the permanent repair when scheduled together. |
| Complex or large-scale job | On estimate | Needs an on-site look when leaks span multiple roof sections or the panel system needs broader re-fastening. |
| Estimate | Free | Response within 24 hours at (530) 924-0344, with no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot screw replacement | Starting at $750 | Covers a defined roof section with a modest count of failed fasteners, new screws, washers, and sealant. |
| Full-slope re-fastening | Starting at $1,400 | Systematic replacement of every fastener on one slope, priced by square footage and pitch. |
| Barn or outbuilding re-fastening | Starting at $1,100 | Oversized screws and new washers on older sheds, priced by roof size and access. |
| Complex or large-scale job | On estimate | Multi-slope roofs, rot at purlins, or storm damage need an on-site look before we quote. |
| Travel | Included | in Chico and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (530) 924-0344, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Panel roof repair and re-fastening | From $5.50/sq ft | Covers failed screw and washer replacement plus lap resealing on sound panels. |
| New corrugated or R-panel install | From $5.50/sq ft | Includes panels, screws, closures and trim on a prepared deck or purlins. |
| 5V or wide-span agricultural building | On estimate | Span, purlin condition and access decide the number, so we look first. |
| Retrofit over existing roof | On estimate | Depends on existing layers, deck condition and code limits on recover. |
| Travel | Included | In Chico and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (530) 924-0344, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof replacement, standard profile | Starting at $9/sq ft | Includes tear-off, underlayment, steel shingles, and standard flashing on an accessible single-story roof. |
| Slate or shake profile upgrade | Starting at $11/sq ft | Premium stamped profiles and colors cost more per square and take longer to lay. |
| Complex roof with dormers and valleys | On estimate | Steep pitch, multiple penetrations, and cut-up rooflines need an on-site measure before we quote. |
| Deck repair and sheathing replacement | On estimate | Priced per sheet after tear-off reveals soft or delaminated sheathing under the old roof. |
| Travel | Included | In Chico and surrounding Butte County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (530) 924-0344, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel, shake or shingle profile | Starting at $9/sq ft | Includes panels, underlayment, and standard trim; pitch and roof complexity move the price. |
| Stone-coated steel, tile profile | Starting at $11/sq ft | Covers tile-profile panels and trim; steeper two-story roofs and multiple valleys add labor. |
| Full tear-off and deck repair | On estimate | Price depends on the number of existing layers and how much decking needs replacement. |
| Retrofit over existing shingles | On estimate | Allowed only with one sound layer; we inspect the deck and confirm code compliance first. |
| Estimate | Free | On-site inspection and written quote, response within 24 hours at (530) 924-0344. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper bay or dormer pans | Starting at $20/sq ft | Includes formed copper pans, soldered seams, and new underlayment over the existing deck. |
| Aluminum porch or bay roof | Starting at $18/sq ft | Includes factory-finished formed aluminum, fasteners, and trim on an accessible single-story roof. |
| Full copper or zinc architectural roof | On estimate | Full roofs need an on-site look at pitch, geometry, deck condition, and access before pricing. |
| Custom flashing and trim | Starting at $450 | Includes shop-formed copper counterflashing, valley metal, or a chimney cricket, priced per detail. |
| Travel | Included | in Chico and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (530) 924-0344, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Reflective acrylic coating | Starting at $2.50/sq ft | Includes wash, rust spot treatment, and reflective topcoat; roof pitch and rust severity move the rate |
| Elastomeric coating | Starting at $3.25/sq ft | Thicker flexible film for older panels; seam wear and panel count affect the final price |
| Full restoration system | Starting at $4.50/sq ft | Wash, rust converter, fastener washer replacement, primer, and topcoat; rust severity drives cost |
| Complex or large-scale job | On estimate | Steep two-story roofs, heavy rust, or solar arrays need an on-site look before pricing |
| Travel | Included | In Chico and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (530) 924-0344, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single chimney flashing repair | Starting at $600 | Includes diagnosis, removal of failed flashing, and new in-house bent counter-flashing for one chimney. |
| Skylight flashing repair | Starting at $750 | Covers one skylight curb with new flashing; steep two-story access in Canyon Oaks raises the price. |
| Multiple penetrations or valley work | On estimate | Several skylights, a chimney, and valley flashing need an on-site look before pricing. |
| Hidden damage or sheathing repair | On estimate | Rotted sheathing or corroded panel edges found under old flashing are quoted after opening the detail. |
| Travel | Included | in Chico and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (530) 924-0344, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snow guards over entries and driveway | Starting at $1,200 | Covers guards, sealed fasteners, and layout on a typical single-family roof. |
| Standing seam clamp system | Starting at $1,650 | Non-penetrating seam clamps, higher material cost, no panel penetration. |
| Exposed-fastener screw-mounted guards | Starting at $1,350 | Sealed screw guards for corrugated and ribbed panels on valley homes. |
| Snow rails on long runs | On estimate | Rail length, roof pitch, and number of drop zones need an on-site look. |
| Travel | Included | In Chico and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (530) 924-0344, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and damage report | Free inspection | Full roof walk, photo documentation, and written scope, no charge and no obligation |
| Minor repair (screws, flashing, ridge cap) | Starting at $350 | Re-fastening, washer replacement, and resealing, price moves with roof height and access |
| Panel or section replacement | Starting at $850 | Matching panel profile and color, price moves with damage size and material availability |
| Storm damage with insurance documentation | On estimate | Photo set and scope for your adjuster, priced after we see the full damage |
| Travel | Included | in Chico and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (530) 924-0344, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard residential metal roof inspection | Free estimate | On-roof check of fasteners, seams, flashing, and coating with a written photo report included. |
| Insurance or storm damage documentation | Starting at $250 | Photo-documented damage report formatted for claim files, priced by roof size and number of slopes. |
| Pre-listing or pre-purchase inspection | Starting at $300 | Condition and remaining service life report for real estate, including recover layer count where applicable. |
| Exposed-fastener audit on barns and shops | On estimate | Screw-by-screw torque and washer check on large agricultural roofs needs an on-site look first. |
| Travel | Included | In Chico and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (530) 924-0344, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, standard run | Starting at $9/linear ft | Includes on-site forming, hidden hangers, and one standard downspout per run. |
| Standing seam clamp system | Starting at $14/linear ft | Clamp hangers that grip the seam without piercing the panel, plus finish-matched trim. |
| Ember-resistant metal guard package | Starting at $6/linear ft | Stainless micro-mesh guard sized for needle and oak leaf load on ridge homes. |
| Oversized downspouts and routing | Starting at $180 each | 3x4 or 4x5 outlets with extensions that move water away from the foundation. |
| Complex or large-scale job | On estimate | Two-story eaves, steep ridge roofs, and long runs need an on-site look before a number. |
| Estimate | Free | Response within 24h at (530) 924-0344, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Repair and re-fastening | Free estimate | Includes roof walk, fastener and flashing inspection, and written repair scope. |
| Exposed-fastener panel roof | Starting at $6.50/sq ft | Through-fastened ribbed panel with screws, washers and standard trim. |
| Standing seam panel roof | Starting at $11.00/sq ft | Concealed-fastener panel for low-slope and long runs, includes trim. |
| Large commercial or ag building | On estimate | Square footage, purlin condition and access drive the number, so we walk it first. |
| Travel | Included | No separate mileage fee in Chico and surrounding Butte County areas. |
| Estimate | Free | Response within 24 hours at (530) 924-0344, no obligation to book. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Chico need a crew that understands the real demands of the Sacramento Valley and the surrounding foothills. Chico Metal Roofing is a network of licensed, bonded, and insured local contractors who install, replace, re-roof, and repair metal roofing systems built for scorching summers, fall fire weather, and wet winter storms. From steep mountain pitches and heavy tree cover to high-elevation exposure and the large stock of aging screw-down roofs across the region, we match the system to the site and the budget.
We serve Chico, Paradise, Oroville, Magalia, Durham, and the surrounding communities, including historic neighborhoods near Bidwell Mansion, the Avenues, Barber, Chapmantown, north Chico, Canyon Oaks, and the rebuilt homes and ridge properties across fire country. Whether you need a Class A roof on a rebuild or a straightforward repair on a ranch house, our team provides straight guidance and durable work. Reach out for a free estimate and we will help you sort out the right path for your roof.
Metal roofs are durable, but they are not maintenance-free, and most leaks we see start with a small failure that was ignored. On 15 to 30 year old exposed-fastener roofs, the number one cause is fasteners backing out as the EPDM sealing washers dry, shrink, and crack. Once that seal is gone, water finds the hole. Seam separation from thermal movement, failed pipe boots, and flashing gaps at chimneys, skylights, and valleys are the next most common entry points. Wind-lifted panels after a storm and punctures from fallen limbs are also frequent, especially on homes surrounded by valley oaks, sycamores, and orchard trees.
Ignoring a small leak lets water track along purlins and decking far from the entry point, which can rot sheathing, damage insulation, and turn a simple repair into a much larger project. The honest call between repair and replacement depends on the age and condition of the panels, the deck, and the fasteners. In many cases, a full screw replacement and re-fastening restores a watertight roof for a fraction of replacement cost, and we will tell you plainly when that is the right choice.
If you have an active leak, separated seam, or storm damage, call (530) 924-0344 to schedule an inspection. Our metal roof leak repair team finds the actual source, not just the stain on your ceiling, and explains your options without pressure. We also handle storm and wind damage repair and full metal roof inspections to catch small issues before they spread.
We install the full range of metal roofing systems, and the right one depends on your home, your budget, and how much maintenance you want over the life of the roof. Standing seam metal roofing uses concealed clips and hidden fasteners for a clean, premium profile with no exposed screws to service. Corrugated and ribbed panel roofing is the economical workhorse for cabins, barns, workshops, and agricultural buildings. We also install metal shingles, stone-coated steel, and copper and specialty metal for accents and distinctive homes.
Here is the honest comparison: standing seam costs more upfront and has no exposed fasteners to maintain, while screw-down systems cost less and need their fasteners and sealing washers serviced over the years. When the deck is sound, metal roof over shingles (retrofit) can be a legitimate way to save on tear-off and disposal; when the deck is not sound, a full tear-off is the right call. We will walk you through both and recommend what actually fits your roof.
Metal roof projects are typically quoted per square foot for installations, while repairs are often priced as flat-rate jobs. The final number depends on the panel system and metal gauge, roof pitch and complexity, whether we tear off or recover, the condition of the decking, and access to the roof. Because every roof and site is different, we frame all figures as typical ranges, and final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
For a clearer picture of how systems and scopes compare, visit our pricing page, then request a free estimate or free roof inspection. We will give you a written scope and straight answers, including when a repair or coating is the smarter spend instead of a full replacement.
If a storm has damaged your roof, we inspect the damage and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. We document what we find, and you decide how to proceed with your insurer.
On permits, this is informational only: in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Historic district or HOA design review can also affect panel profile and color choices. Requirements vary, so always verify with the Chico building or planning department before starting your project. For help understanding the process or to schedule an inspection, contact our team.
Ready to get started? Chico Metal Roofing serves in Chico and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Chico · Response within 24h · No commitment · ☎ (530) 924-0344
Your Free Quote Request